5 Series E60 525i (N52K) SAL
Lift off retainer (1).
Remove shims (3).
Remove selector rod (2).
Installation:
Grease shift rod pin.
Grease, refer to BMW Service Operating Fluids.
Make sure shims (3) are in correct position.
Insert special tool 25 1 120 in mounting and turn 90
°
counterclockwise.
Press mount upwards out of shift arm.
Remove rubber gaiter from body cutout and lift out with selector
lever.
Installation:
Insert rubber gaiter with arrow in direction of travel towards front.
RA Removing and installing shift lever
BMW AG - TIS
17.02.2013 14:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -