5 Series E60 525i (N52K) SAL
Open screws (1) and (2).
Remove front middle bumper mounting (3) and V-support (4).
Drill out rivets (1).
Open screws (2).
Remove carrier for bumper trim with deformation element (3).
Remove front wall holder (4).
Installation:
If necessary, use screws or locking pins (instead of rivets) to
secure deformation element.
RA Replacing front wall
BMW AG - TIS
17.02.2013 18:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -