5 Series E60 525i (N52K) SAL
Note:
Protect bore (1) against scratching (risk of corrosion).
Release screw (2).
Installation:
Press cover (3) slightly towards rear when screwing down (gap).
Tightening torque 51 21 8AZ
.
Remove stop pad (1).
Release screw (1).
Press mounting (2) back, lever out cover (3) at rear and remove
in direction of arrow.
Tightening torque 51 21 7AZ
.
Installation:
Following parts of cover on outside handle (5) must not be
damaged or missing:
1
Thread
2
Bridges
3
Bridges
4
Screw surface
RA Removing and installing/replacing cover on outside handle
BMW AG - TIS
18.02.2013 00:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -