5 Series E60 525i (N52K) SAL
Suspend seal (1) with open lip pointing inwards over door. Pull
protection of positioning aid (liner) off seal in sections.
Stick on seal (1) as follows:
-
Position seal with color coding on door window frame at rear
top.
-
Gently press seal without stretching up to start of positioning
aids.
-
Check positioning of seal, correct if necessary (sag max.
30 mm).
-
Firmly press down seal vertically to adhesive area up to
above-mentioned area.
-
Gently press seal without stretching up to entrance area.
-
Check positioning of seal, correct if necessary and firmly
press.
-
Pull remaining protective film (liner) off seal.
-
Press remaining seal without stretching.
-
Check positioning of seal, correct if necessary and firmly
press.
Remove positioning aids and assemble front door.
RA Removing and installing/replacing seal on front door, left or right
BMW AG - TIS
18.02.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -