5 Series E60 525i (N52K) SAL
52 17 035
Removing and installing/replacing gearing for
head restraint adjustment
Necessary preliminary tasks:
•
Remove shaft for head restraint adjustment
Remove retainer (1) on left and right.
Remove gearing (2) on left and right straight towards front.
Installation:
To ensure identical adjustment of gearings (2), carry out following
work step on both gearings:
•
Unscrew component (4) until threaded rod (5) is flush with
edge (3).
RA Removing and installing/replacing gearing for head restraint adjustment
BMW AG - TIS
18.02.2013 02:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -