5 Series E60 530i (N52K) SAL
33 33 001
Replacing left or right rear axle carrier
compression strut
Important!
Observe safety instructions for raising the vehicle
Driving without tension and compression struts is not
permitted!
Risk of damage!
The rear axle carrier must be supported at the front if both
compression struts have to be replaced!
Necessary preliminary tasks:
•
If necessary, remove rear tension strut
•
Remove tank cover
•
Version with Dynamic Drive: Disconnect pressure lines for
oscillating motor of rear axle from tension strut.
Release screws (2).
Tightening torque 33 32 17AZ
.
Release bolt (1) and remove compression strut.
Secure rear axle carrier by inserting bolt (1).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tightening torque 33 33 3AZ
.
RA Replacing left or right rear axle carrier compression strut
BMW AG - TIS
21.02.2013 19:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -