5 Series E60 530i (N52K) SAL
Replacement of rubber frame with removed or new windscreen:
There is no sealing lip (2) in area (A) on left/right.
Cut open rubber frame (1) at marked point (3) and remove rib
over entire length.
Apply adhesive in groove on windscreen side and stick in rubber
frame (1).
After installing windscreen: If necessary, pull liner* off adhesive
tape (5) and press rubber frame (1) down firmly on roof outer
skin.
4
Aluminium strip
* Liner is the protective film on adhesive tape (5).
RA Removing and installing/replacing rubber frame (Security) for windscreen (top)
BMW AG - TIS
21.02.2013 23:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -