5 Series E60 530i (N52K) SAL
Version 1:
Slide floating roofliner (1) behind headliner (3).
Release remaining screws between mounting frame and glass
sunroof cover with special tool 54 1 230 .
Release screw on mounting for bracket at rear.
Version 2:
Connect BMW diagnosis system and Service function:
-
Body
-
Locking and security functions
-
Slide/tilt sunroof
-
Select delivery position.
Remaining screws on mounting frame are now accessible and can
be released.
Move both front seats back as far as possible.
Move front seat backrests as far back as possible.
Release screw (2).
Feed out roofliner (1) at mucket (3).
Pull roofliner (1) towards front out of sliding clips (2) and feed
out towards right rear door.
Installation:
Following parts of roofliner (7) must not be damaged or missing:
1
Mounting for console, front
2
Metal nuts for cover frame
3
Mounting for console, rear
4
Mountings for sliding clips
5
Sliding clips (release from roof frame)
6
Retainers (if necessary, insert in roof frame)
RA Removing and installing/replacing roofliner (long version with slide/tilt sunroo
BMW AG - TIS
22.02.2013 00:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -