5 Series E60 530i (N52K) SAL
Detach prestamped positioning aid from backing.
-
Positioning aid "A2" front door, left (door lock, top)
-
Positioning aid "B2" front door, right (door lock, top)
Align positioning aid with printed help markings (X, Y), bores and contact edge (2) to front door and press.
Seal must rest on positioning edge (1) during sticking.
X
Start of bend radius
Y
Bore for door lock
Important!
-
Do not grip bonding surface.
-
It is not the length of pressing in time but rather the level
of pressing (approx. 10 ... 15 N/cm
2
) which is decisive
here.
-
Separation of seal after pressing destroys the adhesive
layer.
Note:
After being pressed on gently, seal can be pulled off again up to 3
times. Do not dirty adhesive area.
RA Removing and installing/replacing seal on front door, left or right
BMW AG - TIS
22.02.2013 01:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -