5 Series E60 530i (N52K) SAL
67 11 555
Removing and installing/replacing servodrive
for tank filler flap
Necessary preliminary tasks:
•
Remove luggage compartment trim on side panel on right.
•
Disconnect battery negative lead.
Unfasten plug connection (1) and disconnect.
Slacken screws (2) and feed servodrive for tank filler flap (3)
towards rear out of retaining plate.
Remove servodrive for tank filler flap (3) in direction of arrow.
Turn sleeve (1) with a suitable tool (e.g.:pointed pliers) approx.
45
°
in direction of arrow and pull out of cover housing (2).
Installation:
Slide sleeve (1) over tank filler flap locking pin (2).
Make sure sleeve (1) is correctly engaged in cover housing (3).
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
22.02.2013 08:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -