5 Series E60 530i (N53) SAL
11 12 719
Resurfacing cylinder head sealing face (N53)
Important!
Reconditioning on cylinder head max. 0.3 mm
Necessary preliminary tasks:
•
Remove cylinder head.
•
Remove exhaust camshaft.
•
Remove intake camshaft.
•
Remove all roller cam followers.
•
Remove all HVCA elements.
•
Remove all valves.
Check evenness of cylinder head sealing faces with a standard
straightedge (1).
Note:
Max. deviation from level (longitudinal) 0.10 mm
Check evenness of cylinder head sealing faces with a standard
straightedge (1).
Note:
Max. deviation from level (transverse) 0.05 mm
RA Resurfacing cylinder head sealing face (N53)
BMW AG - TIS
21.02.2013 14:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -