5 Series E60 530i (N53) SAL
Rotate sensor gears until locating pins on special tool 11 8 520
match up.
Push special tool 11 8 520 onto cylinder head.
Secure special tool 11 8 520 with bolts (1 and 2).
Note:
Bolts (1 and 2) M6x45 with captive shim.
Remove chain tensioner (1).
Screw special tool 11 9 340 into cylinder head.
Pretension timing chain with special tool 00 9 250 to 0.6 Nm .
Tighten central bolts (2 and 3) with special tool 00 9 120 .
Tightening torque: 11 36 1AZ
.
Remove all special tools.
Assemble engine.
RA Adjusting camshaft timing (N53)
BMW AG - TIS
21.02.2013 14:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -