5 Series E60 530i (N53) SAL
Necessary preliminary tasks:
•
Remove a pressure line
Note:
The following description applies to all injectors.
Unlock plug (1) and remove.
Release screw and remove holding-down element (2).
Remove injector (3).
Note:
If several injectors are removed, ensure that each injector is
reinstalled in its original location (cylinder).
Mark injectors.
Procedure in event of stuck injector:
Mount special tool 13 0 180 on injector (1).
Mount special tool 13 5 250 .
Carefully knock out injector (1) with special tools 13 0 180 and
13 5 250 .
RA Removing and installing or replacing an injector (N54, N53)
BMW AG - TIS
21.02.2013 15:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -