5 Series E60 530i (N53) SAL
24 11 011
Removing and installing/sealing or replacing
transmission sump (GA6HP19Z)
Important!
Remove transmission sump only after it has cooled down.
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Recycling:
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
Remove rear underbody protection.
Remove exhaust system bracket from transmission.
Remove oil drain plug (1).
Tightening torque: 24 11 6AZ
.
Drain automatic transmission fluid.
Installation:
Replace oil drain plug.
RA Removing and installing/sealing or replacing transmission sump (GA6HP19Z)
BMW AG - TIS
21.02.2013 16:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -