5 Series E60 530i (N53) SAL
![background image](/bmw/5_Series_E60/530i_N53_SAL/page-681003.png)
Preparation of new part:
Mark new part in accordance with severance cut on vehicle +
20 mm extra material and cut (1).
Secure door opening at welding spot flanges with support strut (1) (refer to Workshop Equipment & Planning CD,
Chapter 7).
Open weld joints in area (2).
Installation:
MIG solder seam in area (2) is replaced by a MAG weld seam.
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
21.02.2013 21:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -