5 Series E60 530i (N53) SAL
41 21 510
Replacing front left door pillar (front side
panel removed)
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 21 510).
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs.
Spot-weld bonding is used on the E60. Observe specific
procedure.
Place vehicle on straightening bench.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) A-pillar, outer
-
(2) Attachment, entrance, outer
-
(3) Crashbox
-
(4) Connection, side frame, bottom
-
(5) Connection, side frame, top
-
(6) Attachment, endplate
-
(7) Connection, A-pillar/roof frame
-
(8) Shaped section, A-pillar, inner
Open brazing solder and weld joints in area (1).
Remove endplate attachment (2).
Open weld joints in areas (3).
Installation:
Replace brazed seams with MAG weld seams in area (1).
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
21.02.2013 21:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -