5 Series E60 530i (N53) SAL
Installation:
Apply adhesive in area (1).
Flange edge of side panel in area (1) flush to outer wheel arch
section.
Flange edge of wheel arch (3) of rear side panel flush to outer
wheel arch section.
Do not flange sharp edges as the flange edge may begin
breaking!
Measurement a=4.5 mm
(1) Adhesive
(2) Side panel, rear
Note:
Additional work steps for M5 end here.
RA Replacing rear left side panel (partial replacement before longitudinal member c
BMW AG - TIS
21.02.2013 21:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -