5 Series E60 530i (N53) SAL
Overview of removed door lock protective cover (1) and
protective mat upper section (2).
Note:
Version with Comfort Access/CA:
CA sensor (4) must not be damaged.
Unlock catches (2) on carrier (1).
Press lock cylinder (5) behind door outer skin (3).
If necessary, disconnect plug on CA module.
Pull carrier (3) towards rear/top until screw (1) of sheet metal
slot (2) is free.
Remove carrier (3) for outside door handle.
Installation:
Seals (1) on carrier (3) must not be damaged.
Important!
Water drainage channel (2) must not be fouled/clogged.
RA Removing and installing/replacing carrier for left or right outside door handle
BMW AG - TIS
21.02.2013 22:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -