5 Series E60 530i (N53) SAL
Version with fogging sensor:
After replacing windscreen:
Replace fogging sensor, refer to repair instructions.
Version with head-up display (HUD):
When replacing windscreen, replace rain/light solar sensor, see repair instruction .
Before bonding, install windscreen with seal(s) and check HUD; if necessary, press expanding foam tape down with
hand roller.
After bonding windscreen, check and if necessary adjust HUD.
Work steps for removing and installing windscreens:
refer to repair instructions.
Note:
If no document is displayed after you have clicked on a "framed cross-reference":
It is not necessary or permitted for the model selected.
RA Instructions on gluing windscreen
BMW AG - TIS
21.02.2013 23:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -