5 Series E60 530i (N53) SAL
When replacing left microfilter housing lower section:
Bonding position, protective mat (1):
Place protective mat (1) on brake fluid expansion tank. Coat
upper side of protective mat with window glass adhesive. Place
left microfilter housing lower section in installation position,
remove again and press protective mat down firmly in this position
without slipping.
Protective feature, top left wheel arch and top left bulkhead:
Protective mat (1) bonded to top left wheel arch. Protective
mat (2) bonded to top left bulkhead.
Protective feature control unit (DME):
Protective mat (1) inserted between right suspension strut
dome (4) and electronics box control unit (3) and bonded to
suspension strut dome. Protective mat (2) inserted between
electronics box control unit housing (3) and wheel arch and
bonded to wheel arch.
Armour plating is installed above original cover and secured with
original bolts (1).
RA Removing and installing/replacing engine compartment protective features (Securi
BMW AG - TIS
22.02.2013 00:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -