5 Series E60 530i (N53) SAL
Position fold scraper with blade (20 mm) between armour
plating (1) and adhesive tape (2), carefully pull aerial
amplifier (3) downwards and drive fold scraper forward in-
between. Remove aerial amplifier (3).
Installation:
Aerial amplifier is bonded to armour plating with 2 x 2 -ply
double-sided assembly adhesive tape* (length 360 mm). *
Sourcing reference: BMW Parts Service
Before bonding, clean bonding surfaces (board, smooth side, and
armour plating, moulded rooflining) with spirit or isopropyl alcohol
(air drying time 10 mins.).
Replacement:
Only in conjunction with 2 x 2 -ply double-sided assembly
adhesive tape* (length 360 mm) and rear window aerial wiring
harness*. Remove aerial amplifier plastic covers. Remove 6
spring contacts (1) on strip conductor side with soldering iron.
Solder 6 new cables in place of aerial amplifier spring
contacts (3) with insulation overlapping (2).
* Sourcing reference: BMW Parts Service
Overview, colour coding, plug housings/connections for rear
window aerial:
1
Blue (Z1)
2
White (B1)
3
Black (A1)
4
Blue (Z2)
5
White (B2)
6
Black (A2)
RA Removing and installing/replacing aerial amplifier (Security) (diversity)
BMW AG - TIS
22.02.2013 06:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -