5 Series E60 530Li (N52) SAL
11 31 505
Adjusting camshaft timing (N52)
Special tools required:
•
00 9 120
•
00 9 250
•
11 0 300
•
11 4 281
•
11 4 282
•
11 4 283
•
11 4 290
•
11 9 340
Necessary preliminary tasks:
•
Remove cylinder head cover.
Remove fastener (1) in direction of arrow.
Installation:
Install fastener (1) with bore facing outwards.
Rotate crankshaft at central bolt into TDC position.
Slide in special tool 11 0 300 in direction of arrow and block
crankshaft.
Important!
On engines with automatic transmissions, there is shortly
before the special tool bore for the TDC position a large bore
which can be confused with the special tool bore.
If the flywheel is secured in the correct bore with special tool
11 0 300 , the engine can no longer be moved at the central bolt.
RA Adjusting camshaft timing (N52)
BMW AG - TIS
21.02.2013 16:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -