5 Series E60 530Li (N52) SAL
Release screws (3).
Tightening torque: 11 12 5AZ
.
Note:
Screw (4) is under servodrive.
Release screw (4).
Turn servodrive with screw (2) counterclockwise in direction of
arrow.
Servodrive can now be withdrawn in direction of arrow.
Installation:
All removed subassemblies are reinstalled in reverse sequence.
Screw in shaft (2) in counterclockwise direction until servodrive
rests on flange of cylinder head cover.
Assemble engine.
Check function of DME.
RA Removing and installing/replacing positioning motor for eccentric shaft (N52)
BMW AG - TIS
21.02.2013 16:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -