5 Series E60 530Li (N52) SAL
11 42 020
Removing and installing/replacing fullflow oil
filter (N52)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Drain coolant.
•
Remove intake air manifold.
•
Unfasten oil filter cover.
•
Protect drive belt against dirt.
Release screw (1).
Tightening torque: 11 42 2AZ
.
RA Removing and installing/replacing fullflow oil filter (N52)
BMW AG - TIS
21.02.2013 16:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -