5 Series E60 530Li (N52) SAL
13 90 500
Replacing tank vent valve (N52 / N52K / N51 /
N53)
Necessary preliminary tasks:
•
Check stored fault messages
•
Switch off ignition
•
Remove throttle valve assembly
Installation location:
Tank vent valve is fitted at bottom on intake air manifold.
Unlock plug (1) and remove.
Unlock hose (2) and detach.
Unlock hose (3) on intake manifold and detach.
Detach tank vent valve (4) from bracket and remove.
Note:
Read out fault memory of DME control unit.
Now clear the fault memory.
RA Replacing tank vent valve (N52 / N52K / N51 / N53)
BMW AG - TIS
21.02.2013 17:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -