5 Series E60 530Li (N52) SAL
Disconnect line (1) to fuel filter and seal off at fuel filter.
Disconnect suction jet pump from fuel filter.
To do so, press catch (2) downwards and detach suction jet
pump.
E60/M57TU only:
Carefully remove left sensor unit from tank.
Unlock line (1).
Pull suction jet pump out of holder.
To do so, press catch (2) downwards and detach suction jet
pump (2).
Unlock and disconnect plug (1) of hose pack.
Note:
Release plug by pressing lock and disconnect.
Replacing fuel level sensor:
Unlock plug (2) and press out in direction of arrow.
Release catches (1) and pull fuel level sensor out of unit.
Disconnect cable from pressure regulator and feed out of cable
gland.
RA Removing and installing/replacing fuel filter with fuel level sensor
BMW AG - TIS
21.02.2013 17:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -