5 Series E60 530Li (N52) SAL
![background image](/bmw/5_Series_E60/530Li_N52_SAL/page-391002.png)
Important - modified screw connection!
Screws must be replaced and - because of the modified
surface coating - tightened to increased torque!
Release screws (1).
Remove tension strut (2).
Installation:
Replace screws.
Tightening torque 51 61 1AZ
.
RA Removing and installing/replacing tension strut on spring strut dome
BMW AG - TIS
21.02.2013 19:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -