5 Series E60 530Li (N52) SAL
32 33 001
Removing and installing (replacing) steering
wheel (up to 03/2007)
Note:
Wheel/chassis alignment is not necessary after the steering wheel
has been removed and installed or replaced.
Necessary preliminary tasks:
•
Remove airbag unit
•
Replacement only: Remove retaining plate for multifunction
steering wheel switch
Move wheels/steering wheel into straight-ahead position.
Disconnect plug connection(s) and remove connecting lead(s)
from steering wheel.
Release screw (1) and remove steering wheel.
Secure volute spring cassette with adhesive tape against twisting.
Installation:
Make sure connecting lead(s) is/are correctly laid.
Tightening torque 32 33 1AZ
.
Important!
Risk of damage!
Locking pin (1) must engage in recess of driver (2).
Installation:
Align steering wheel using grooved toothing to steering column
and attach.
RA Removing and installing (replacing) steering wheel (up to 03/2007)
BMW AG - TIS
21.02.2013 19:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -