5 Series E60 530Li (N52) SAL
Completely unscrew one wheel stud on each rear wheel.
Installation:
Tightening torque 36 10 1AZ
.
Turn wheel until adjustment screw is visible in tapped hole.
Turn adjusting screw with a screwdriver until the wheel is no
longer able to turn.
Then unfasten the adjusting screw 8 notches.
Unlock adjuster unit (ASZE).
Lever restraint hook (2) outwards with a suitable screwdriver (1).
Restraint hook (2) must disengage from stop of adjusting spring.
2.
Setting instruction for parking brake Bowden cables
The handbrake lever must be applied 5 times to approx. 400N
actuating force.
2.1 On brake analyzer
0th tooth (handbrake released):
Vehicles with manual transmission: Shift lever in neutral
position.
Vehicles with automatic transmission: Selector lever in N""
position.
-
Without locking differential
≤
150 N.
-
With locking differential
≤
200 N (possibly odd display).
1st tooth: No increase in braking force with regard to 0th tooth.
Indicator lamp can be lit.
RA Adjusting handbrake
BMW AG - TIS
21.02.2013 21:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -