5 Series E60 530Li (N52) SAL
Installation:
Use 2 EMC screws in each case (4 x in total) in areas (1) and (2).
Note:
Right side only:
Open rivet joints in areas (1).
Installation:
Use 2 rivets (size 13) in areas (1).
Note:
Engine carrier has been blanked out for purposes of clarity.
Spot-drill rivets in areas (1) and (2) from protruding rear side or
grind and punch through.
Installation:
Use 5 rivets (size 13) in areas (1).
Use 2 rivets (size 13) in area (2).
Open rivet joints in areas (1) to (3).
Installation:
Use 3 rivets (size 13) in area (1).
Use 4 rivets (size 13) in area (2).
Use 3 rivets (size 13) in area (3).
RA Replacing front section of left engine support
BMW AG - TIS
21.02.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -