5 Series E60 530Li (N52) SAL
![background image](/bmw/5_Series_E60/530Li_N52_SAL/page-856002.png)
Remove stop pad (1).
Release screw (1).
Press mounting (2) back, lever out cover (3) at rear and remove
in direction of arrow.
Tightening torque 51 22 7AZ
.
Installation:
Following parts of cover on outside handle (5) must not be
damaged or missing:
1
Thread
2
Bridges
3
Bridges
4
Screw surface
RA Removing and installing/replacing cover on outside handle
BMW AG - TIS
22.02.2013 00:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -