5 Series E60 530Li (N52) SAL
Replacing seat cover:
Version with OC3 mat:
-
OC3 mat must not be kinked under any circumstances.
Detach all retainers in side area from longitudinal wires (1).
Pull trim wires (1) forward out of seat cover.
Carefully fold back seat cover and release retainers from cross-
wires (2).
Remove seat cover from support.
Important!
Remove all remnants of clips from seat cover and support.
Support (1) with OC3 mat (2).
Important!
No retainer remainders may be fitted as well.
Handle OC3 mat with extreme care.
Do not kink OC3 mat.
Do not clamp OC3 mat.
OC3 mat must lie without folds under seat cover.
Installation:
Bend new retainer (2) closed with pliers
52 0 050 .
1.
Support
2.
Clips
3.
Trim thread in seat cover
4.
Trim thread in support
5.
Seat cover
Remove trim threads (1) from seat cover (2).
(3)
If necessary, cable for seat heating
Installation:
Slide trim threads (1) into new seat cover (2). If necessary, cut
mounting for trim threads.
RA Replacing seat cover for left or right front seat (normal/electric)
BMW AG - TIS
22.02.2013 02:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -