5 Series E60 530Li (N52) SAL
61 00 ...
Diagnosis for Condition Based Service
Note: Red symbol for pre-delivery check
The vehicle is coded at the end of the assembly line so that the
red symbol for the pre-delivery check is shown in the Next Service
display (same symbol as vehicle check).
The symbol is a reminder to the Service staff that the pre-delivery
check has not yet been carried out on this car.
Note: Do not carry out a reset.
Do not confuse this function with the "Vehicle check" maintenance
scope.
Do not carry out a reset via the instrument cluster.
When carrying out the pre-delivery check with the "Transport
Mode/Pre-delivery check" service function:
The symbol is automatically removed from the display after the
service function has been executed.
Key
Explanation
Key
Explanation
1
Function and component selection
2
Service functions
3
Maintenance
4
Transport Mode/Pre-delivery check
5
CBS Correction Tester Data
6
Reset CBS Condition Based Service
7
CBS Correction Vehicle Data
4 service functions are available in the BMW diagnosis system for maintenance:
RA Diagnosis for Condition Based Service
BMW AG - TIS
22.02.2013 04:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -