5 Series E60 530Li (N52) SAL
61 31 079
Removing and installing/replacing switch for
hazard warning flashers/central locking
Special tools required:
•
64 1 020
Important!
Risk of damage!
Protect middle fresh-air grille decorative trim in working area
against damage, tape off if necessary.
Lever out switch for hazard warning system/central locking (1)
with special tool 64 1 020 and pull back.
Disconnect associated plug connection and remove switch for
hazard warning flashers/central locking (1).
RA Removing and installing/replacing switch for hazard warning flashers/central loc
BMW AG - TIS
22.02.2013 05:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -