5 Series E60 530Li (N52) SAL
64 11 916
Replacing temperature sensor for cold-air
distributor
Necessary preliminary tasks:
•
Remove audio system controller /
Car Communication Computer.
Release screws (1).
Fold back middle function carrier (2) in direction of arrow.
Installation:
Make sure middle function carrier (2) is correctly seated.
Turn temperature sensor for cold-air distributor (1) through
approx. 90
°
and pull out in direction of arrow.
Unfasten plug connection (2) and disconnect.
Installation:
Make sure temperature sensor for cold-air distributor (1) is
correctly seated.
RA Replacing temperature sensor for cold-air distributor
BMW AG - TIS
22.02.2013 07:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -