5 Series E60 530Li (N52) SAL
Unfasten plug connection (1) and disconnect.
Unclip electric cable (2) at cable guides (3).
Release screws (4) and remove ACC sensor (5) from retaining
plate (6).
Installation:
Adjustment aid (1) must not be damaged.
If necessary, detach adjustment aid (1) from retaining plate (2).
To do so, unlock catches (3) and detach adjustment aid (1) in
direction of arrow from retaining plate (2).
Replacement:
Carry out rough adjustment of ACC sensor (1).
If necessary, perform rough adjustment at adjusting screws (2).
•
Measurement A [mm]: 22.5 to 25.0
Replacement:
Carry out ACC sensor adjustment using BMW diagnostic system.
RA Removing and installing (replacing) ACC sensor
BMW AG - TIS
22.02.2013 08:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -