5 Series E60 530Li (N52) SAL
67 31 570
Removing and installing/replacing drive for
head restraint height adjustment on left or
right front seat
Necessary preliminary tasks:
Version without crash-active head restraint:
•
Remove head restraint
•
Remove rear panel on front seat backrest.
Version with crash-active head restraint:
•
Remove crash-active head restraint
Pull backrest cover (1) in direction of arrow over metal lugs (2)
and detach.
Detach backrest cover (1) on both sides from backrest frame.
Feed backrest cover (1) out of upper backrest frame.
Disconnect plug connection (1).
Release screws (2).
Tightening torque 67 31 3AZ
.
Feed out drive for head restraint height adjustment (3) in
direction of arrow and remove.
RA Removing and installing/replacing drive for head restraint height adjustment on
BMW AG - TIS
22.02.2013 09:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -