5 Series E60 530Li (N52) SAL
86 21 ...
Removing ball pivot
Note:
Remove gas spring,
refer to 86 21 ... Removing gas spring.
Note:
The following text describes how to remove the ball pivot from
the hinge retaining bracket on the rear lid as an example.
Proceed in the same way for the other ball pivots.
Make sure the attachments are reinstalled in the correct
sequence. Only in this way will the gas springs open and
close properly.
Grip ball pivot (1) at hexagon mount (2) and release nut (3).
Installation:
Use new self-locking nut.
Tightening Torque,
refer to Technical Data 86 21 10AZ.
RA Removing ball pivot
BMW AG - TIS
22.02.2013 10:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -