5 Series E60 530Li (N52) SAL
33 32 Control Arms and Struts
Type
Thread
Tightening specification
Measure
1AZ Trailing arm to rear axle carrier
E34 (M5)
Replace screw
tighten with special tool
33 3 060 and torque
wrench Hazet 6291-2CT
55 Nm
E30, E32, E34,
E36
tighten in normal position
67 Nm
E30, E32, E34,
E36
10.9
77 Nm
2AZ Trailing arm to console
E31
M14 x 1.5
127 Nm
3AZ Trailing arm to wheel carrier
E31
M18 x 1.5
278 Nm
4AZ Traction strut to wheel carrier
E31
Tapered spigot and bore
must be free of grease
80 Nm
E38, E52
E39
Tapered spigot and bore
must be free of grease
55 Nm
E53
56 Nm
E60, E61, E63,
E64, E65, E66,
E67
M10
Replace nut
65 Nm
E60, E63, E64,
E65, E66
M12
Replace nut
108 Nm
5AZ Control arm to rear axle support
E31
tighten in normal position
95 Nm
E38
tighten in normal position
60 Nm
E39
tighten in normal position
With torque wrench Hazet
6290-CT
60 Nm
E52
tighten in normal position
60 Nm
E53
tighten in normal position
with special tool
32 3 150 and torque
wrench Hazet 6291-ICT
59 Nm
AZD Control Arms and Struts
BMW AG - TIS
22.02.2013 15:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -