5 Series E60 530Li (N52) SAL
-
Quick-clamping units for wheel alignment on
non-BMW vehicles with rim run-out
compensation.
-
Rims without sensors boreholes (rims for BMW
vehicles from other manufacturers)
3.12 Retainers
-
The most varied clamping options for the
measuring equipment are possible thanks to
the versatile retainers and the rubber-coated
thrust pieces, even on exotic light-alloy rims.
4. Workstation
4.1 Environment
Description:
Requirements:
All lifting platforms currently recommended by BMW (see
Workshop Equipment Planning documentation, Issue 11)
for wheel alignment meet the requirements for the BMW
KDS.
-
Wheel alignment pits
-
Pillar-type lifts with set-down device
-
2 plunger-type lifting platforms with
set-down device
-
Repair stands with set-down device
No particular requirements have to be met in respect of the
location at which the BMW KDS is used. The measuring
device can be installed over working pits or on lifting
platforms.
-
One measuring area
(approx. 4.5 m x 7.0 m).
-
The rotating plates must be pinned to the platform
SBT Kinematic Diagnosis System and environment BMW KDS (Beissbarth)
BMW AG - TIS
22.02.2013 18:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -