5 Series E60 530Li (N52) SAL
VK-21, Caris
Register/Index: 1
1 05 97 (181)
Vertrieb D
KDL d. VG's u.
Imp zur Info
01/1997
Clamping tool for torque converter
Situation:
To clamp the torque converter in place in the automatic transmission, a new clamping tool
was developed with the Order No. 24 4 130. This tool prevents the converter from falling
out of the transmission during removal and installation.
This tool (basic unit) can also be used for future transmissions.
This clamping tool replaces tool 24 4 120 for clamping the torque converter in place on
the automatic transmission A5S 560Z (5HP30).
Affected
vehicles:
Vehicles with the automatic transmissions: A5S 310Z (5HP18), A5S 440Z (5HP24),
A5S 560Z (5HP30), A5S 300J (Jatco), A4S 310R (THM R1)
Procedure:
The clamping tool will only be supplied as a store tool on request.
Refer to Enclosure 1.
Refer to Repair Instructions 3 Series E36, Z3 Series E36, 5 Series E39, 7 Series E38, job
item 24 00 021, 24 00 025, 24 00 026, 24 00 027.
SWS Clamping tool for torque converter
BMW AG - TIS
22.02.2013 20:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -