5 Series E60 530xi (N52) SAL
Note:
N53 only
Remove plug (1) from holder.
Release screws.
Remove transmission cross-member.
Tightening torque 27 00 10AZ
.
Disconnect plugs (1) and (2) from servomotor.
•
Unlock and disconnect plug (1) by turning.
•
Do not touch pins
•
Release cable from retainers
•
Insert special tool 24 2 390 in sealing sleeve.
These tasks are described in Notes on mechatronics.
Important!
Read and comply with important note.
RA Removing and installing automatic transmission (6HP19Z AWD) N52/N52K/N53
BMW AG - TIS
22.02.2013 00:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
