5 Series E60 530xi (N52) SAL
31 11 506
Lowering/raising front axle carrier (AWD)
Special tools required:
•
00 2 040
•
31 4 060
•
31 4 070
Warning!
Danger to life!
Secure engine in installation position to prevent it from falling
down.
Important!
Before installing the front axle carrier, make sure there is zinc
foil (1) present on middle bolting point (2).
Replace damaged zinc foil (1).
Do not stick over zinc foil (1).
Necessary preliminary tasks:
•
Secure engine in installation position
•
Remove reinforcement plate
•
Remove steering gear cover on both sides
•
Remove lower steering spindle from power steering gear
•
If necessary, disconnect plug connection from EH converter
and remove line from front axle carrier
•
If necessary, disconnect plug connection from ride-height
sensor and remove line from front axle carrier
RA Lowering/raising front axle carrier (AWD)
BMW AG - TIS
22.02.2013 01:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
