5 Series E60 530xi (N52) SAL
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Release expansion tank and place to one side
•
Remove alternator drive belt
•
Remove front assembly underside protection
•
Remove coolant thermostat
Disconnect plug connection (1).
Release screws (2, 3) and detach lines.
Installation:
Replace all sealing rings and moisten with refrigerant oil.
Tightening torque 64 52 1AZ
.
Detach hose assembly bracket for oil lines (1).
Note:
Secure A/C compressor (3) against falling out.
Release bolt (2) and if necessary remove with adapter sleeve
behind.
Release bolts (1) and remove compressor towards front.
Installation:
Make sure adapter sleeves are correctly fitted.
Tightening torque 64 52 3AZ
.
If necessary, replace faulty adapter sleeves.
RA Replacing A / C system compressor (N52, AWD)
BMW AG - TIS
22.02.2013 12:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
