5 Series E60 535xi (N54) SAL
Release screw (1).
Tightening torque 17 21 2AZ
.
Detach oil line (2) from engine oil cooler flange.
Catch and dispose of emerging fluid.
Hang oil line upwards so that no more oil can escape.
The same procedure applies to the second oil line.
Installation:
Replace sealing rings.
Release screws (1).
Feed out engine oil cooler and remove.
Note:
After completing work, check engine oil level and top up if
necessary.
RA Removing and installing/replacing engine oil cooler (N54)
BMW AG - TIS
22.02.2013 07:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -