5 Series E60 535xi (N54) SAL
Expose return line up to connection on power steering gear.
Release banjo bolt (1) and remove return line (2).
Installation:
Replace all sealing rings.
When tightening down banjo bolt, make sure stop (3) rests
correctly on power steering gear.
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing return line for power steering (N54 AWD)
BMW AG - TIS
22.02.2013 10:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
