5 Series E60 545i (N62) SAL
11 33 517
Removing and installing/replacing rocker
arms on right inlet side (N62 from 9/03 and
N62TU)
Special tools required:
•
11 9 470
•
11 9 473
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Removal of rocker arms is described separately from
installation.
•
Remove servomotor for right eccentric shaft
•
Remove ignition coils on cylinder bank 1 to 4
•
Remove right cylinder head cover
•
Remove spark plugs on cylinder bank 1 to 4
•
Remove right inlet and exhaust adjustment units
Important!
The inlet camshaft must first be rotated so that when the
bearing bracket is removed the intermediate levers do not slip
out and damage the camshaft.
RA Removing and installing/replacing rocker arms on right inlet side (N62 from 9/03
BMW AG - TIS
22.02.2013 12:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -