5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-301001.png)
13 62 531
Replacing coolant temperature sensor (N62,
N62TU)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
E65 only. E66:
Remove design cover.
Recycling
Catch and dispose of escaping coolant.
Observe country-specific waste-disposal regulations.
Coolant temperature sensor is mounted on water pipe at front.
Unlock plug (1) and remove.
Release temperature sensor (2).
Installation:
Tightening torque 13 62 2AZ
.
Vent cooling system and check for leaks.
If necessary, top up coolant.
RA Replacing coolant temperature sensor (N62, N62TU)
BMW AG - TIS
22.02.2013 13:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -