5 Series E60 545i (N62) SAL
18 40 020
Removing and installing/replacing right
exhaust manifold (N62, N62TU)
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Necessary preliminary tasks:
•
Remove right control sensor
•
Remove right monitor sensor
•
Remove complete exhaust system
•
Secure engine in installation position with special tool
•
Remove right engine support arm
For purposes of clarity, nuts are shown on removed engine.
Release nuts on exhaust manifold.
Remove exhaust manifold towards bottom and pull out towards
rear.
Installation:
Replace seals.
Seal beads faces the exhaust manifold.
Coat threads with copper paste.
Replace nuts.
Tightening torque 11 62 1AZ.
RA Removing and installing/replacing right exhaust manifold (N62, N62TU)
BMW AG - TIS
22.02.2013 14:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
