5 Series E60 545i (N62) SAL
M54/M57/M57TU/N52/N52K/N53/S54 only:
Block flywheel with special tools 11 9 260 and 11 9 265 .
N62 only:
Block flywheel with special tools 11 9 260 , 11 9 263 and
11 9 264 .
Release screws and remove clutch from flywheel.
Installation:
Clean flywheel and check for wear and damage.
Replace damaged flywheel.
Important!
Always replace clutch plates fouled e.g. by oil, cleaning agent.
Observe the following procedure when installing the removed
clutch and clutch plate.
Installation:
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
RA Removing and installing/replacing clutch (SAC)
BMW AG - TIS
22.02.2013 14:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -